Gravel Calculator
Estimate gravel volume, approximate weight and bags from area, depth and editable density.
Open calculator →Hard landscaping becomes easier to check when each layer and boundary has its own quantity.
Plan hard-landscaping quantities by separating area, depth, whole products, sheet layouts and linear edges.
Estimate gravel volume, approximate weight and bags from area, depth and editable density.
Open calculator →Work out a slab minimum and a separate order quantity using the slab dimensions and your chosen wastage allowance.
Open calculator →Estimate paving, compacted sub-base, bedding and optional simple jointing quantities for a patio build-up.
Open calculator →Calculate membrane strips and whole rolls from roll dimensions, overlap and layout orientation.
Open calculator →Calculate linear edging for beds, circles, paths, gaps and multiple runs, then convert to pieces or rolls.
Open calculator →Estimate whole sleepers for straight runs, courses and rectangular raised-bed frames, including practical side-by-side counts.
Open calculator →Measure the footprint first. Gravel and sub-base use area × depth; paving slabs use slab coverage; membrane uses roll layout; edging uses a linear run. Do not force every material through the same formula.
A patio can need slabs, bedding and compacted sub-base. A gravel area can need membrane and edging. The parent hub keeps those parts together while the Gravel and Paving hubs go deeper into their own workflows.
The mathematical quantity can be fractional; bags, slabs, rolls and sleepers cannot. Keep the base requirement visible, then round the purchase unit appropriately and apply any separate allowance explicitly.
Understand how a chosen gravel depth changes volume, weight and bag quantities for paths and decorative areas.
Read guide →Choose an ordering allowance for cuts, breakage, curves and patterns instead of assuming every patio needs the same percentage.
Read guide →Move to the next quantity only when it describes a genuinely different part of the job.